Note: The shopping cart and checkout on this site are used to request samples of our products and is currently not enabled for e-commerce.
Clean Room Rags
Clean Room Cleaning Rags for all industries and applications.
Featured Products
MicroPolx® 4000 HP
£0.00
The MicroPolx 4000 HP is a micro denier for critical cleanroom applications. Made from polyester and nylon filaments and laundered and packaged in an ISO Class 4 (Class 10) cleanroom. This combination of properties provides MicroPolx 4000 HP with the high level of cleanliness abrasion resistance and chemical compatibility required for ISO Class 3 and above environments and applications requiring critical control of contaminants combined with superior performance. It offers exceptional dry cleaning efficiency for the most sensitive surfaces.
Durx® 670
£0.00
Superior strength and absorbency make Durx® 670 an ideal choice as a general purpose wiper. Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. Durx® 670 can be used for cleaning and maintenance in laboratories as well as aerospace and defense, microelectronics, food processing, pharmaceutical, and biomedical device manufacturing environments.
PRO-WIPE® AP
£0.00
Pro-Wipe® AP is an all purpose industrial rayon/polyester nonwoven wiper. Durable and low-linting, Pro-Wipe ® AP is tough enough to be a rag replacement and clean enough to be used in a controlled manufacturing environment.
Twillx® 1622
£0.00
Twillx® 1622 is an environmentally friendly wipe designed for cleanrooms rated ISO Class 6 (Class 1000) and above. It is made from 100% cotton woven in a twill pattern and bias cut to minimize contamination. Twillx® 1622 is engineered for tough cleaning applications requiring absorbency, strength and heat resistance. Twillx® 1622 is a sturdy wiper that permits cleaning and wiping of heated surfaces as well as polishing and burnishing rigid disk surfaces. This wiper may be used in Wafer FAB, laboratories, biotech research facilities, aerospace, electronics, photo processing, print, computer and disk drive assembly, semiconductor, biomedical, pharmaceutical, and hard disk manufacturing.
Pro-Wipe® 880
£0.00
Pro-Wipe® 880 is ideal for cleaning areas in which acids and solvents are a concern. The multilayer construction produces a soft material that won’t scratch or abrade even the most sensitive parts. It is appropriate for use in laboratories as well as aerospace and defense, microelectronics, food processing, photo and print processing, pharmaceutical, and biomedical device manufacturing environments.
MicroPolx® 1100
£0.00
Cleanroom Laundered Polyester Microfiber Knitted Wiper. MicroPolx 1100 is a 100% polyester microfiber sealed edge cleanroom wipe, laundered and packaged in an ISO Class 4 cleanroom. The wiper’s microfiber yarn has 3 times the surface area of standard polyester yarns, resulting in a soft smooth surface and more efficient cleaning performance. Laser cut edges and a proprietary laundering process provide critically low particle and fiber release as well as best-in-class ion and non-volatile residue levels. MicroPolx 1100 is recommended for sensitive applications in ISO Class 4 (Class 10) and above cleanrooms.
PRO-WIPE® 750
£0.00
Pro-Wipe® 750 is a solvent-resistant wiper with superior absorbency. It makes an excellent upgrade for industrial wiper users. It is composed of a layer of cellulose bonded between two outer layers of polypropylene. This combination of properties provides Pro-Wipe® 750 with exceptional cleanliness, absorbency, and chemical resistance to strong solvents.
SatPax® 1000
£0.00
Berkshire SatPax® 1000 combines Durx® 670 nonwoven wipers (composed of a hydroentangled nonwoven blend of 55% cellulose and 45% polyester) with various saturation levels of isopropyl alcohol (IPA) and DI water. This pre-wetted wiper format provides a more cost-effective and easy-to-use solution compared to manual wetting of dry wipers, which requires bulk handling of messy solvents and maintenance of squirt bottles and results in inconsistent wetting and cleaning.
DURX® 670-ROLL
£0.00
Superior strength and absorbency make Durx® 670 Rolls an ideal choice for a general purpose wiper. Manufactured without the use of binders or surfactants, ion levels and organic extractables remain low. Durx® 670 wipers can be used for cleaning and maintenance in laboratories, aerospace, defense electronics, food processing, computer assembly and semiconductor, circuit board, pharmaceutical, and biomedical device manufacturing.
Polx® 1200
£0.00
Polx® 1200 is a knife-cut, unlaundered cleanroom wiper recommended for ISO Class 5 and above environments composed of 100% continuous filament polyester knit fabric. This combination of properties provides Polx® 1200 with the cleanliness, abrasion resistance and chemical compatibility required for ISO Class 5 and above environments and applications requiring critical control of contaminants combined with good performance. Polx® 1200 is meant to and lower cost less critical nonwovens. Complies with RoHS 2002/05 and REACH requirements. Designed for applications requiring better cleanliness than a nonwoven, but not the high level of cleanliness provided by a laundered knit.
CapSure®-VP
£0.00
CapSure®–VP is a sealed-edge, cleanroom-laundered wiper that has been specially engineered for superior surface cleaning ability. A patent-pending surface treatment enables the wiper to capture and retain particulate contamination, resulting in more efficient cleaning and reduced likelihood of cross contamination of critical surfaces. CapSure®–VP has the high level of cleanliness and abrasion resistance of cross contamination of critical surfaces. CapSure®–VP applications requiring critical control of contaminants. Complies with RoHS 2002/05 and REACH requirements.
MicroSeal®-VP
£0.00
MicroSeal-VP wipers are 100% continuous filament knit polyester with ultrasonically sealed edges. The wipers are lightweight and tightly knitted to minimize abrasion of critical components. Delivering low ions and extractable residues, this highly absorbent wiper is available in economical value packaging.
VALUSEAL® IONX®
£0.00
Berkshire ValuSeal® IonX® is a laser-sealed-edge, cleanroom laundered wiper recommended for ISO Class 3 and above cleanroom environments. Composed of 100% polyester continuous filament yarns, its smooth knit construction and laser-sealed edges make it deal wiper for applications requiring critically low levels of particle and fiber release along with durability and chemical compatibility. A proprietary ISO Class 4 cleanroom laundry process insures ultra-low NVR and ionic contaminant levels, making ValuSeal® IonX® suitable for the most sensitive cleaning processes.